ORIGINAL BRIDGE REPLACE AND UPGRADES

Modern 2-Point Spacing

Mount Spacing: 2-7/32 (2.2”) (56.2mm)

String Spacing: 2-1/16 (52.4mm)

Saddles: 10.4mm

For 2-Point spacing. The higher end bridges out there are universal fit. You can change around any 2-point bridge from Fender. Some models are not sold by Fender and can not be lriginally replaced unless you find used ones. See list at the bottom:

Just have in mind, that you can not use Original Fender Block saddles on Deluxe and American Standard (2008-Today) bridge and vice versa. If you want to change bent steel saddles to block saddles, you have to buy Gotoh or other brands or change the entire bridge.

FENDER ORIGINAL PARTS OFFSET BRIDGES:

American Series (Used on American Standard 1987-2007) OFFSET SADDLES

American Deluxe / Ultra OFFSET SADDLES

These two bridges ONLY fits Fender Original Offset Block Saddles. Some 3rd party manufacturers do makes offset saddles though.

FENDER ORIGINAL PARTS NON-OFFSET BRIDGES:

American Standard (Used on American Standard (2008-Today)

Deluxe Series (PING Taiwan) Bent Steel Saddles (Original Bridge for most  Mexico Strats)

You can NOT use Fender Offset Block saddles on these two bridges, Use Gotoh saddles or other brands

3rd PARTY BRIDGES

Gotoh SD510 Series

Kluson K2PT

BABICZ: FCH-2 / FCH-2Z
HIPSHOT: 42100VB

SADDLES:  (10.4mm)

FENDER ORIGINAL:

 0990840000 Fender American Standard ’86-’07 OFFSET saddles

 0075123049 Fender Bent Steel for NON-OFFSET bridges.

OTHER: (Non OFFSET ONLY)

GOTOH: 

S11 (Block Saddles Brass)

S105 (Block Saddles)

S105 (Locking Saddles)

HIGHWOOD:
HG 10-50