< Back

Model# 011-5010-XXX (Rosewood)

BODY

Wood: Alder

Lacquer: Satin Nitrocellulose

Shape: Standard Stratocaster

Contours: Vintage Deep Contours

Pickguard: 4-Ply White Pearloid, 11-Hole

Pickup Routing: HSH

Serial: 

• Headstock Rear | US+8 digits (2021-2022)
• Neckplate | CW + 5 digits (Since 2023)

NECK

Wood: Flatsawn Maple

Fretboard: Rosewood

Fret Markers: White Dots

Neck Finish: Satin Urethane

Neck Profile: Modern “D”

Neck Depht .820”–.870”

Headstock: Classic Style | Gloss Urethane

Nut Width: 1.687” (42.9 mm)

Nut Material: Bone

Scale: 25.5"

Radius: 10”–14” Compound

#Frets: 22

Fretwire: 6120 Medium Jumbo (.046-.103)

Trussrod: Unknown Rod, Headstock Adjust

MicroTilt: No

Contoured Heel: Yes

HARDWARE 

Bridge: 6-Screw American Vintage Synchronized Tremolo

• Mount Spacing: 2-7/32 (56.4mm)

• String Spacing: 2–7/32 (56.4mm)

Block: Steel Block

Saddles: Nickel Plated Bent Steel “FENDER”

Trem Arm: 10-32 w/ Tip

Tuners:  Schaller/Fender Locking Tuners All-Short Posts

String Tree: 2 x Ezy Glyde

Plastic: Standard Plastic White

Neckplate: 4-Bolt “Cory Wong Stratocaster + Serial (since 2023)

Strap Buttons: Standard

ELECTRONICS

Switch: 5-Way Oak Grigsby  / Std. Tip

Wiring: Modified Modern (N/NM/M/MB/B) 

Push/Pull Off:

Pos.1: Neck Pickup (T1)

Pos.2: Neck + Middle Pickup (T1)

Pos.3: Middle Pickup (No Tone / Bypass)

Pos.4: Middle + Bridge (T2)

Pos.5: Bridge (T2)

Push Pull On:  Bypasses switch w/ Neck and Middle PU direct out (T2)

Pots: 3 Pots

• 1 x CTS 250k Master Volume
• 1 x CTS 250k Tone Control (Neck)
• 1 x CTS 250k Push Pull Tone Control (Bridge)

Capacitor: Greasebucket PCB (T1+T2)

Treble Bleed: PCB Circuit (Volume Pot)

Pickup Config: SSS 

Neck Pickup: Seymour Duncan Cory Wong Clean Machine SC

Middle Pickup: Seymour Duncan Cory Wong Clean Machine SC

Bridge Pickup: S. Duncan C.Wong Clean Machine Custom Stack Plus

RWRP: Yes

CASE: Deluxe Molded Case

STRINGS .010 -.046 Nickel Plated Steel

INFO:

The Clean Machine pickups are also sold retail by Seymour Duncan