USA STRATOCASTERS

Model# 10-7700-XXX (Rosewood) 1988 Only

Model# 10-7702-XXX (Maple)

BODY

Wood: Alder

Lacquer: Gloss Polyurethane

Shape: Standard Stratocaster

Pickup Routing: SSS

Serial: Rear Headstock | SE+6 digit  / SN+6 Digit (’95 - ’97)

NECK

Wood: Maple w/Skunk Stripe

Fretboard:

• Rosewood Scalloped (1988 Only)
• Maple Scalloped

Fret Markers: Black Dots

Neck Finish: Gloss Urethane

Neck Profile: Standard “C”

Neck Depht: Unknown (WANTED!)

Headstock: Classic Style Small

Nut Width: 1.650" (42mm)

Nut Material: Brass

Scale: 25.5"

Radius: 9.5”

#Frets: 21

Fretwire: 6100 Jumbo (.110-.055)

Trussrod: Single Action, Hell Adjust

MicroTilt: Yes

Contoured Heel: No

Neck Stamp: Stamped Date

HARDWARE  

Bridge: 2-Point American Standard  Tremolo

• Mount Spacing: 2–7/32 (56.4mm)

• String Spacing: 2–1/16 (52.4mm)

Saddle: Satin Stainless Block Saddles

Block: Milled Steel Block

Trem Arm: 10-32 /w Tip

Tuners: 

    ↪DiMarzio Split-Shaft Tuners (1988 Only)

    ↪Vintage Splitshaft Klusons

String Tree: Ezy-Glyde

Neckplate: 4-Bolt, Blank

Strap Buttons: Standard Vintage

PLASTIC HARDWARE

Pickguard: 3-Ply White, 11-hole

Rear Cover: 3-Ply White, Letterbox Slot

Knobs: White, Fender Standard Plastic

PU Covers: White, Standard Plastic

Trem-Arm & Switch Tip: White

ELECTRONICS

Switch: 5-Way CRL Blade / White Tip

Wiring: Modern Standard  N/NM/M/MB/B

Pots: 3 Pots

• 1 x CTS  Master Volume
• 1x CTS 250k TBX Tone Control (Neck)
• 1x CTS 250k TBX Tone Control (Middle + Bridge)

Pickup Config: SSS

Neck Pickup: DiMarzio HS-3 (DP117) Stacked Humbucker

Middle Pickup: American Standard Single-Coil Flush Pole

Bridge Pickup:   DiMarzio HS-3 (DP117) Stacked Humbucker

ACCESSORIES & INFO

CASE: Tweed Case

INFO:

Prototypes built in 1987