USA STRATOCASTERS
Predecessor: American Standard Roland Ready
Model# 011-7500-XXX (Rosewood)
Model# 011-7502-XXX (Maple)
BODY
Wood: Alder
Lacquer: Polyurethane
Shape: Standard Stratocaster
Contours: Standard Modern USA Contours
Pickguard: 3-Ply Parchment, 11-hole
Pickup Routing: Customised
Serial: Rear Headstock | Z+6-digits
NECK
Wood: Maple
Fretboard: Maple or Rosewood w/ Rolled Edges
Fret Markers: Black or White Dots
Neck Finish: Satin Urethane
Neck Profile: Modern “C”
Neck Depht .830” - .880”
Headstock: Standard Small
Nut Width: 1.685 (42.8 mm)
Nut Material: Bone
Scale: 25.5"
Radius: 9.5”
#Frets: 22
Fretwire: 6130 Medium Jumbo (.046-.103)
Trussrod: Bi-Flex Headstock Adjust
MicroTilt: Yes
Contoured Heel: No
Neck Stamp: Stamped Date
HARDWARE
Bridge: 2-Point Deluxe Tremolo
• Mount Spacing: 2–7/32 (56.4mm)
• String Spacing: 2–1/16 (52.4mm)
Block: Tapered Steel Block
Saddles: Stainless Steel Matte Block Saddles
Trem Arm: Pop-In
Tuners: Standard Schaller/Fender Die Cast Sealed
String Tree: Ezy-Glyde
Knobs/Cover: Standard Parchment Plastic
Neckplate: 4-Bolt “Fender Corona California” Stamp
Strap Buttons: Standard
ELECTRONICS
Switch: 5-Way Oak Grigsby / Aged White Tip
Switch selects Acoustic modes or regular Strat/Tele Pickups
Wiring: DSP Technology Modeling, Battery Driven
Pots: 2 Pots + 2 Mini Rotary
• 1 x Roland A250k / B10k Master Volume
• 1x Roland A250k / B10k Master Tone
• 1x Roland Rotary Selector for Modeling
- 5 Styles Acoustic Tones Modeling
- HH Stratocaster Mode
- Normal Stratocaster Mode (Standard Stratocaster)
- Modeled Stratocaster Mode (6 or 12-String + Alternate Tiningds)
- Telecaster Mode (6 string + 12 String)
• 1x Roland Rotary Selector for different Tuning Modes (Transpose)
Pickup Config: SSS/S
Neck Pickup: American Standard 016730 Single Coil Plastic Bobbin
Middle Pickup: American Standard 016730 Single Coil Plastic Bobbin
Bridge Pickup: American Standard 016730 Single Coil Plastic Bobbin
Aux Pickup: Roland GK Pickup
ACCESSORIES & INFO
CASE: Standard Hard Case (USA & Canada Only)
Colors:
3-Tone Sunburst (700) (Fully Black Rear Body)
Black (706)
BRIDGE UPGRADE INFORMATION
Original Specs for the bridge on this guitar is:
Modern 2-Point Spacing
Mount Spacing: 2-7/32 (2.2”) (56.2mm)
String Spacing: 2-1/16 (52.2mm)
Saddles: 10.4mm
For 2-Point spacing. The higher end bridges out there are universal fit. You can change around any 2-point bridge from Fender. If you require the original bridge to be replaced, please check the Dervice Manulal of this guitar (if any)
Some bridges that fit:
American Series (Used on American Standard 1987-2007)
American Standard (Used on American Standard 2008-Today)
Deluxe Series | | American Deluxe
Other popular choices are:
Gotoh SD510 Series
Kluson K2PT
There are more bridges from other brands that will fit.
If you are uncertain if they will fit this guitar, send me a message for assistance